这是描述信息
Search
Confirm
Cancel

PRODUCTS

全部分类
Current:
Homepage
/
/
TH8145 Halogen acid gas release measuring device
image/MMiNDhd5QeyGBtxp6gzfeQ
image/MMiNDhd5QeyGBtxp6gzfeQ
1

TH8145 Halogen acid gas release measuring device

It is used to determine the total amount of halogen acid gas in low-halogen and halogen-free flame-retardant cables and to measure the acidity of the gas by measuring the PH value and conductivity. Comply with standards: GB/T17650.1-1998, GB/T17650.2-1998 and IEC60754-1:1994, IEC60754-2:1991 standards; at the same time meet the GB/T19666-2005 "Flame-retardant and fire-resistant wires and cables" standard Table 6 regulations and GA306.1-2007 Article 6.3.4, GA306.2-2007 Article 6.3.4, UL2556-2007 Article 9.10 and 9.11 requirements. Main technical parameter
Product serial number
TH8145
Description

Overview:

It is used to determine the total amount of halogen acid gas in low-halogen and halogen-free flame-retardant cables and to measure the acidity of the gas by measuring the PH value and conductivity.
Comply with standards: GB/T17650.1-1998, GB/T17650.2-1998 and IEC60754-1:1994, IEC60754-2:1991 standards; at the same time meet the GB/T19666-2005 "Flame-retardant and fire-resistant wires and cables" standard Table 6 regulations and GA306.1-2007 Article 6.3.4, GA306.2-2007 Article 6.3.4, UL2556-2007 Article 9.10 and 9.11 requirements.

Main technical parameters:
1. Tubular furnace: The effective length and diameter of the heating chamber are 600× ф42mm, equipped with an adjustable electric heating system. Heating power: 220V /10KW
2. Combustion tube:
1. Material: Refractory pipe made of silica, resistant to corrosive gas.
2. Specifications: The inner diameter is 40mm, the length extending from the inlet side of the tube furnace is 60~200mm, and the length extending from the outlet side is 60~100mm, leaving a gap for thermal expansion.
3. Burning boat for measuring the release of halogen acid gas:
1. Material: Use fused quartz tube.
2. Specifications: length 100mm, width 25mm, depth 10mm.
3. Combustion boat feeding method: using bar magnet and platinum wire pulling method.
4. Gas collection: Two selected bottles are used: one of which is equipped with a magnetic stirrer and contains 220 mL of sodium hydroxide solution.
5. Gas supply system:
1. Air flow meter: 20mL~200mL adjustable
2. Compressor (provided by your company)
6. Sampling: 500mg~1000mg
7. Determination of the halogen acid content of the halogen acid gas release measuring device:
1. Analytical balance: accuracy of 0.1mg
2. Digital PH meter: the accuracy is 0.02PH
3. Conductivity meter: Measuring range: (0~1×105)μS/cm.

We could not find any corresponding parameters, please add them to the properties table
 TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Vertical+Horizontal Burning Tester is suitable for the burning resistance test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, put the test piece on the top of the flame and burn for 15 seconds. Extinguish for 15 seconds, repeat 5 times and check the burning situation of the specimen. The burning, extinction time and number of repetitions can be set, and it can be operated automatically. It is suitable for simple factory inspection of UL1581, UL13, UL444, UL1655 VW-1 and CSA FT-1 standards.
 TH8155 oxygen index tester
TH8155 oxygen index tester
 TH8030D 3D torsion testing machine
TH8030D 3D torsion testing machine
Scope of application: It is suitable for the testing requirements of high flexible cables such as TUV, VDE, UL, etc. The machine structure is a vertical design structure. Mainly used for high flexibility and bending resistance flexible cables, flexible towline cables, flexible cables for robot manipulators, tow cables, moving cables, sensor/encoder cables, servo motor cables, with high flexibility, bending resistance, cyclic bending, continuous core, no deformation, etc.
 (3+1) Torsion + Bending Testing Machine
(3+1) Torsion + Bending Testing Machine
 (2+1) Torsion + Bending Testing Machine
(2+1) Torsion + Bending Testing Machine
 Single station wire horizontal twisting machine
Single station wire horizontal twisting machine
 Small drag chain testing machine
Small drag chain testing machine
 TH8037 drag chain cable repeated bending test machine
TH8037 drag chain cable repeated bending test machine
1. Working principle: The cable bending test machine simulates the working conditions of the towline cable and completes the softness test and fatigue life test of the cable through continuous reciprocating motion.
 TH8037 Drag chain cable repeated bending test machine
TH8037 Drag chain cable repeated bending test machine

SAUNDERS

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码

Professional testing equipment manufacturer

Dongguan Tianhai Quality Inspection Instrument Co., Ltd.

COPYRIGHT © 2021   Dongguan Tianhai Quality Inspection Instrument Co., Ltd.   ALL RIGHTS RESERVED    粤ICP备15018720号 Powered by www.300.cn