这是描述信息
Search
Confirm
Cancel

PRODUCTS

全部分类
Current:
Homepage
/
/
/
TH8011AVentilation aging test machine 1
image/T0A9tKodRxOAGR6uFfUGrQ
image/T0A9tKodRxOAGR6uFfUGrQ
1

TH8011AVentilation aging test machine 1

TH8011A ventilation type aging tester is suitable for testing the change characteristics of wires, leathers, plastics, rubbers, cloths, before and after heating. In order to maintain the fresh air in the box when the wires are heated, the special ventilation volume adjustment function is provided.
Product serial number
Description

TH8011A ventilation type aging tester is suitable for testing the change characteristics of wires, leathers, plastics, rubbers, cloths, before and after heating. In order to maintain the fresh air in the box when the wires are heated, the special ventilation volume adjustment function is provided.

Technical features
The UL ventilation aging box of our company is designed and manufactured in accordance with the requirements of UL related standards. The focus is on temperature uniformity, stability, heat preservation capacity, air exchange volume, heat lag time, heat exchange capacity, etc. There are special requirements; a lot of new air ducts, fans, electric heating methods, heat preservation materials, chassis structure, etc. The design can be measured by UL and CCIC.
Meet the standard
1. Comply with American Society for Testing and Materials Standards "Forced Ventilation Laboratory Oven for Electrical Insulation" ASTM D5423-93 (R2005) (Type II oven) and ASTM D5374-93 (2005), ASTM D2436, UL1581 Section 420.9 (UL2556 Section) Section 4.2.3);
2. IEC 60216-4-1 (GB/T11026.4) electrical insulating materials. Heat resistance characteristics. Part 4-1: Aging oven. Single-chamber oven;
ISO4577, IEC60811-1-2 (GB/T2951.12), BS903, BS6746, JB7444, GB/T3512, CNS3556, CNS742, JIS7212, JIS7757, etc.

Specification parameters:
1. Volume: 1080ⅹ650ⅹ1280mm (W×D×H)
2. Inner box size: 450ⅹ450ⅹ450mm (W×D×H)
3. Temperature range: room temperature RT+10℃~260℃
4. Temperature control: Chuanghong thermometer, PID digital setting, SCR current adjustment control
5. Control accuracy: ±0.5℃
6. Resolution accuracy: 0.1℃
7. Distribution error: ±1%
8. Heating time: from room temperature to 260°C, about 40 minutes.
9. Test frame: turntable, one layer, rotating speed 8~10r..p.m
10. Timing: 0~999hr
11. Air change rate: 100~200 times/hr adjustable, watt hour meter

Machine structure and material:
a) Inner box material: SUS#304 stainless steel,
b) Outer box material: stainless steel plate, electrostatic paint.
c) Thermal insulation material: high-density rock wool.
d) Heater: a set of solenoid heater, 380V 6KW.

We could not find any corresponding parameters, please add them to the properties table
 TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Vertical+Horizontal Burning Tester is suitable for the burning resistance test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, put the test piece on the top of the flame and burn for 15 seconds. Extinguish for 15 seconds, repeat 5 times and check the burning situation of the specimen. The burning, extinction time and number of repetitions can be set, and it can be operated automatically. It is suitable for simple factory inspection of UL1581, UL13, UL444, UL1655 VW-1 and CSA FT-1 standards.
 TH8155 oxygen index tester
TH8155 oxygen index tester
 TH8030D 3D torsion testing machine
TH8030D 3D torsion testing machine
Scope of application: It is suitable for the testing requirements of high flexible cables such as TUV, VDE, UL, etc. The machine structure is a vertical design structure. Mainly used for high flexibility and bending resistance flexible cables, flexible towline cables, flexible cables for robot manipulators, tow cables, moving cables, sensor/encoder cables, servo motor cables, with high flexibility, bending resistance, cyclic bending, continuous core, no deformation, etc.
 (3+1) Torsion + Bending Testing Machine
(3+1) Torsion + Bending Testing Machine
 (2+1) Torsion + Bending Testing Machine
(2+1) Torsion + Bending Testing Machine
 Single station wire horizontal twisting machine
Single station wire horizontal twisting machine
 Small drag chain testing machine
Small drag chain testing machine
 TH8037 drag chain cable repeated bending test machine
TH8037 drag chain cable repeated bending test machine
1. Working principle: The cable bending test machine simulates the working conditions of the towline cable and completes the softness test and fatigue life test of the cable through continuous reciprocating motion.
 TH8037 Drag chain cable repeated bending test machine
TH8037 Drag chain cable repeated bending test machine

SAUNDERS

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码

Professional testing equipment manufacturer

Dongguan Tianhai Quality Inspection Instrument Co., Ltd.

COPYRIGHT © 2021   Dongguan Tianhai Quality Inspection Instrument Co., Ltd.   ALL RIGHTS RESERVED    粤ICP备15018720号 Powered by www.300.cn