Product Center
HuaihuaTH8014+ Wire Vertical and Horizontal Burning Tester
The TH8014+ vertical and horizontal flame‑testing apparatus is suitable for evaluating the flame‑resistance of various organic materials, including wire and cable insulation and jacketing, printed circuit board substrates, and IC insulators. During testing, the specimen is positioned at the tip of a flame source, exposed to flame for 15 seconds, then allowed to cool for 15 seconds; this cycle is repeated five times, after which the extent of burning is assessed. The device allows users to set the flame‑exposure and cooling durations as well as the number of cycles, and it operates automatically. It is ideal for straightforward factory‑level compliance testing in accordance with UL 1581, UL 13, UL 444, UL 1655 (VW‑1), and CSA FT‑1 standards.
Category:
HuaihuaWire Horizontal and Vertical Flame Propagation Tester
Product Description
The TH8014+ vertical and horizontal flame‑testing apparatus is suitable for evaluating the flame‑resistance of various organic materials, including insulation and sheathing for wires and cables, printed circuit board substrates, and IC insulators. During testing, the specimen is positioned at the tip of a flame source, exposed to flame for 15 seconds, then allowed to cool for 15 seconds; this cycle is repeated five times, after which the extent of burning is assessed. The device allows users to set the flame‑exposure and cooling durations as well as the number of cycles, and it operates automatically. It is ideally suited for straightforward factory‑level compliance testing in accordance with UL 1581, UL 13, UL 444, UL 1655 (VW‑1), and CSA FT‑1 standards.
Technical Specifications:
1. Vertical Burning Chamber: Internal dimensions are 305 × 355 × 610 mm.
2. Horizontal combustion chamber: internal dimensions are 305 × 355 × 610 mm.
3. Vertical spark nozzle: The nozzle angle is 20 degrees and it is equipped with a gas control valve.
4. Horizontal spark nozzle: The nozzle angle is 90 degrees and it is equipped with a gas control valve.
5. Counter: Presettable from 0 to 9999
6. Timer: Two sets, with preset range of 0–99 seconds.
7. Combustion mode: vertical and horizontal types
8. Ignition Method: High-Voltage Automatic Ignition
9. Mode Selection: Manual/Automatic Mode
10. Once the preset number of cycles is reached, the machine automatically stops the test.
11. Fuel: Gas, Methane (provided by the customer)
12. Cabinet material: brushed stainless steel panel
13. Power supply: AC 220V, 50Hz.
Next item
