TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Vertical+Horizontal Burning Tester is suitable for the burning resistance test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, put the test piece on the top of the flame and burn for 15 seconds. Extinguish for 15 seconds, repeat 5 times and check the burning situation of the specimen. The burning, extinction time and number of repetitions can be set, and it can be operated automatically. It is suitable for simple factory inspection of UL1581, UL13, UL444, UL1655 VW-1 and CSA FT-1 standards.
Glow wire testing machine
The TH8055 glow wire testing machine heats the heating wire of the specified material (Ni80/Cr20) and shape (nickel-chromium wire of Φ4mm) with a large current to the test temperature (550℃～960℃) for 1 minute, and then uses the specified pressure (1.0 N) Burn the test sample vertically for 30 seconds, and determine the fire hazard of the finished electrical and electronic equipment depending on whether the test product and the bedding are ignited or the duration of ignition; determine the ignitability and ignition temperature of solid insulating materials and other solid combustible materials (GWIT), Flammability and Flammability Index (GWFI). The glow wire tester is suitable for the research, production and quality inspection departments of lighting equipment, low-voltage electrical appliances, electrical meters, and other electrical and electronic products and their components.
TH8014C Automobile interior material combustion test machine
This machine meets the standards of GB8410-2006, TL1010, GM6090M, DIN7520, GM9070P, and is suitable for the determination of flame retardant properties of automotive interior materials.
TH8058 Leakage Tracking Testing Machine
Leakage tracking test (tracking index test) simulation test items specified by IEC60112, UL 746A, GB/T4207, GB4706.1, ASTM D 3638-92 and other standards. The test is on the surface of a solid insulating material, between platinum electrodes of a specified size (2mm × 5mm), apply a certain voltage and time (30s) a fixed height (35mm) to drop a specified droplet volume of conductive liquid (0.1%NH) 4 CL), used to evaluate the leakage resistance performance of the solid insulating material surface under the combined action of electric field and humid or polluted medium, and determine its comparative tracking index (CT1) and tracking resistance index (PT1).
TH8058B High Voltage Tracking Index Tester/High Voltage Tracking Tester
This instrument is suitable for testing electrical and electronic products, household appliances and their materials for tracking resistance and corrosion resistance. It simulates the use of liquid contaminants and inclined samples at power frequency (48Hz-62Hz) to pass the tracking resistance test. And corrosion measurement to evaluate the resistance to tracking and corrosion of electrical insulating materials used under severe environmental conditions. This machine is designed and manufactured in strict accordance with GB/T6553-2003 and IEC60587-1984.
TH8014B single wire vertical burning tester
The vertical burning test of a single wire and cable is a safety test item that simulates the burning performance of a single wire and cable specified by GB/T18380.1, IEC60332-1, GB/T5169 and other standards. This model is equipped with a ventilating kitchen device to ensure the test Accurate and reliable.
Touch screen needle flame testing machine
The TH8056 needle flame tester uses a needle burner with a specified size (Φ0.9mm) and is supplied with a specific gas (butane) to ignite the test sample at a 45° angle. It depends on whether the test sample is ignited and The burning time and burning length are used to evaluate the fire hazard of small flames caused by fault conditions inside the equipment. Needle flame test is a simulation test project of IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 and other standards stipulating the use of small flame ignition source program. It is suitable for the research, production and quality inspection departments of lighting, low-voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, electronic instruments, electrical meters, electrical connectors, accessories and other electrical and electronic equipment and its parts and components. Used in insulation materials, engineering plastics or other solid combustible materials industries.
- Environmental testing Combustion test Tensile test Wire and cable plug connector Robot cable test More+
COPYRIGHT © 2021 Dongguan Tianhai Quality Inspection Instrument Co., Ltd. ALL RIGHTS RESERVED 粤ICP备15018720号 Powered by www.300.cn