Product Center
SanmingTH8004 Plug Pull-Out Tester
Overview: This plug pull‑out testing machine is used to evaluate the bonding strength between the plug blade and the conductor, as well as the conductor’s resistance to pull‑out forces, employing an impact weight for the pull‑out test.
Test Method: The plug is secured within the socket, with the conductor’s free end attached to the impact hammer rod. A weight is then suspended to perform rotational tests and current‑withstand tests on the E‑terminal (ground terminal).
Test Standard: This test complies with standards such as UL‑817.
Category:
SanmingPlug pull-out testing machine
Product Description
Overview: This plug pull‑out testing machine is used to evaluate the bonding strength between the plug blade and the conductor, as well as the conductor’s resistance to pull‑out force, employing an impact weight for the pull‑out test.
Test method: Secure the plug in the socket, attach the wire end to the impact hammer rod, then suspend a weight to perform the rotational test and the E‑pole (grounding electrode) current‑withstand test.
Test Standard: This test complies with the requirements of standards such as UL-817.
Specifications:
1. Number of specimens: 3 groups
Fixture: 3 sets
3. Distortion rate: 4 cycles per minute
4. Load duration: 3 minutes
5. Pull‑out weight: 2.5 lb
6. Rotating weight: 3 lb
7. Load current: 40 A / 6–12 V
8. The counter is a 6-digit number.
9. Chassis material: Precision‑machined A3 steel sheet with white electrostatic powder coating.
10. Accessory material: A3 steel, precision-machined and electroplated.
11. External dimensions of the cabinet: Length 900 × Width 600 × Height 1680 mm
12. Power supply: 220 V, 50/60 Hz.
Next item
