Product Center
ShaoyangTH8016 Wire Heating Deformation Testing Machine
The TH8016 wire heating deformation testing machine is suitable for measuring the degree of deformation in leather, plastics, rubber, and fabrics, both before and after heating.
This instrument is designed in compliance with the test standards JIS C-3005, UL 1581, UL 758, ASTM D2436, CNS 3556, and 742.
It is used to assess the thermal deformation of materials such as plastics and wire insulation. At a specified temperature, the specimen is allowed to rest freely inside the testing machine for 30 minutes, then clamped between the parallel plates of the device, subjected to a prescribed load, and maintained at the same temperature for another 30 minutes. The thickness difference between the heated and unheated states is measured using a dial indicator; this difference, divided by the original thickness prior to heating and expressed as a percentage, yields the deformation rate.
Category:
ShaoyangHot Deformation Vicat Apparatus
Product Description
The TH8016 wire-heating deformation testing machine is suitable for measuring the deformation of leather, plastics, rubber, and fabrics before and after heating.
This instrument is designed in compliance with the test standards JIS C-3005, UL 1581, UL 758, ASTM D2436, CNS 3556, and CNS 742.
It is used to assess the degree of thermal deformation of materials such as plastics and wire insulation. At a specified temperature, the specimen is allowed to rest freely in the testing machine for 30 minutes, then clamped between the parallel plates of this instrument, subjected to a prescribed load, and maintained at the same temperature for another 30 minutes. A dial gauge is used to measure the change in thickness before and after heating; the difference in thickness divided by the initial thickness, expressed as a percentage, yields the rate of deformation.
Main parameters:
1. Controller: Touchscreen control with programmable settings.
2. Temperature range: Ambient temperature +10℃ to 200℃
3. Temperature control accuracy: ±0.1℃
4. Resolution: 0.1℃
5. Number of specimen groups: three groups
6. Machine Structure and Materials:
1) Inner box dimensions: 600 (W) x 400 (D) x 360 (H) mm
2) Outer carton dimensions: 1100 (L) x 510 (D) x 1580 (H) mm
3) Observation Window: Equipped with a square viewing window for monitoring the product testing process.
4) Inner box material: SUS 304 stainless steel
5) Outer box material: A3 steel with electrostatic powder coating and baked finish.
6) Insulation material: high-density asbestos, offering excellent thermal insulation.
7. Deformation Measurement Device
1) Three Japanese MITUTOYO gauges were used.
2) Deformation resolution: 0.01 mm
3) A balance weight is used to counteract external loads.
4) Weight砝码: three each of 50 g, 100 g, 200 g, and 500 g.
Next item
