这是描述信息
Search
Confirm
Cancel

PRODUCTS

全部分类
Current:
Homepage
/
/
/
TH8027 Single-wing drop test machine
image/XLosf3oWQY-rfCZ0qYH9DQ
image/XLosf3oWQY-rfCZ0qYH9DQ
1

TH8027 Single-wing drop test machine

Product serial number
TH8027
Description

The surface, edges, and corners of the simulated product are subjected to a free drop test after being packaged, and the damage caused by the fall is evaluated, and the impact resistance of the product being dropped during transportation is evaluated. The design of this instrument complies with the test standard of GB/T4857.5~92 ISO2048-1985 JIS 20202-81.

Technical specifications:
1. Test height: 400~1500mm
2. Test space: 800×800×800mm
3. High-level operation: motor drive
4. Height control: using limit control, it will stop automatically after reaching the set height
5. With functions of ascending, descending, and automatic stop
6. Falling point: diamond, angle and surface can be tested
7. Impact floor: 1000×1200×40mm
8. Maximum test piece weight: 100kg
9. Machine weight: about 320kg
10. Power supply: AC 380V four-wire system.

We could not find any corresponding parameters, please add them to the properties table
Previous
Next
 TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Wire Vertical+Horizontal Burning Tester
TH8014+Vertical+Horizontal Burning Tester is suitable for the burning resistance test of various wire and cable insulation coating materials, printed circuit board materials, IC insulators and other organic materials. During the test, put the test piece on the top of the flame and burn for 15 seconds. Extinguish for 15 seconds, repeat 5 times and check the burning situation of the specimen. The burning, extinction time and number of repetitions can be set, and it can be operated automatically. It is suitable for simple factory inspection of UL1581, UL13, UL444, UL1655 VW-1 and CSA FT-1 standards.
 TH8155 oxygen index tester
TH8155 oxygen index tester
 TH8030D 3D torsion testing machine
TH8030D 3D torsion testing machine
Scope of application: It is suitable for the testing requirements of high flexible cables such as TUV, VDE, UL, etc. The machine structure is a vertical design structure. Mainly used for high flexibility and bending resistance flexible cables, flexible towline cables, flexible cables for robot manipulators, tow cables, moving cables, sensor/encoder cables, servo motor cables, with high flexibility, bending resistance, cyclic bending, continuous core, no deformation, etc.
 (3+1) Torsion + Bending Testing Machine
(3+1) Torsion + Bending Testing Machine
 (2+1) Torsion + Bending Testing Machine
(2+1) Torsion + Bending Testing Machine
 Single station wire horizontal twisting machine
Single station wire horizontal twisting machine
 Small drag chain testing machine
Small drag chain testing machine
 TH8037 drag chain cable repeated bending test machine
TH8037 drag chain cable repeated bending test machine
1. Working principle: The cable bending test machine simulates the working conditions of the towline cable and completes the softness test and fatigue life test of the cable through continuous reciprocating motion.
 TH8037 Drag chain cable repeated bending test machine
TH8037 Drag chain cable repeated bending test machine

SAUNDERS

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码

Professional testing equipment manufacturer

Dongguan Tianhai Quality Inspection Instrument Co., Ltd.

COPYRIGHT © 2021   Dongguan Tianhai Quality Inspection Instrument Co., Ltd.   ALL RIGHTS RESERVED    粤ICP备15018720号 Powered by www.300.cn