PRODUCTS
TH8037 Drag chain cable repeated bending test machine
Product introduction:
1. Working principle: The cable bending test machine simulates the working conditions of the towline cable and completes the softness test and fatigue life test of the cable through continuous reciprocating motion.
2. Scope of application: The cable bending tester is suitable for testing the winding resistance and bending times of drag chain cables, drag chains, other flexible cables, power cords, enameled wires, and cable insulation sheaths.
3. Application of the cable bending tester: This machine is used to make destructive tests by mechanically repeated back and forth movement to detect the bending times of the towline or towline cable, and complete the flexure and softness test of the towline or towline cable. After the test, After the number of times, check the degree of damage, cracks, cracks and conductor strand breakage of the wire and cable, and detect the following faults in the test and stop the machine: 1) Conductor break 2) Short circuit between the conductor and the shielding layer.
Detailed parameters:
1. Control system: Taiwan Weilun 7-inch color touch screen + servo motor as power,
Drive the sample to reciprocate through the synchronous belt;
2. Test stroke: 1000mm
3. Test speed: (1~2000) mm/s can be set arbitrarily, which fully meets the 88m/min requirement of the standard;
4. Detection port: 2 independent conduction detection ports, suitable for the test of 1 to 2 groups of samples;
5. On-off signals: 40 (1 set of samples can be connected to 20 signals, 2 sets of samples can be connected to 40 signals);
6. Total counter: 1~99999999 can be set arbitrarily, it can stop automatically when the count reaches the set value;
7. Sub-counter: 2 sub-counters count independently, counting range from 1 to 99999999, with power-off retention function;
8. Chassis structure: A3 steel plate production chassis and the top cover electrostatic spray paint + acrylic transparent window
Beautiful appearance, strong practicability, special design of the upper cover, low noise;
9. Power supply: AC 220V 50Hz;
10. Weight: about 280kg;
11. Dimensions (W×D×H): 1400×700×1310mm.
SAUNDERS
WRITE A MESSAGE TO US
COPYRIGHT © 2021 Dongguan Tianhai Quality Inspection Instrument Co., Ltd. ALL RIGHTS RESERVED 粤ICP备15018720号 Powered by www.300.cn